Smallest and safest portable 9.6-kW charging station (in-cable control and protection device, IC-CPD)! Compatible with all electric cars fitted with a J1772 charging socket.
Single-phase charging with power levels from 1.4 to 9.6 kW at currents of up to 40 ampere. Fully charged in 3-4 hours under ideal conditions.
IP67 waterproof rating, driveover-resistant, operable temperature range from -30°C to +50°C, fully compliant with the latest safety standards.
Red LEDs indicate faults. In this case, the fault code “CCID20” is displayed.
The green LED shows the automatically detected charging intensity, in this case 40 ampere. You can reduce the power rating (amps) using the Select button.
The orange On light shows that current is flowing and the electric car is being charged.
The yellow LED shows the charging mode. Here, the standard mode is displayed. You can change mode by pressing and holding down the Select button.
The automatic adapter recognition function regulates the charging-power current intensity. Eliminates the need for tiresome calculations or manual adjustment of charging-power current intensity.
However, you can use the Select button on the J+ BOOSTER 2 to reduce the charging intensity manually if you wish to.
Impact-resistant, dustproof, and driveover-resistant to wheel loads of over 6,600 lb.
Not just splashproof to the IP67 protection rating: it’s completely waterproof.
The technology of a Type-A-EV residual current device (RCD) is already integrated, eliminating the need for costly and complex retrofitting. Charging stations without Type A-EV RCD protection can be lethal.
Compatible with all e-vehicles fitted with a J1772 connection.
The J+ BOOSTER 2 can be used not only as a portable charging station (IC-CPD), but also as a wallbox unit (with wall-mounting bracket).
The J+ BOOSTER 2
The J+ BOOSTER 2 meets all requirements specified by the standards UL 2594, UL 2231-1 and UL 2231-2.
Detects fault currents
Integrated technology immediately trips a circuit breaker if potentially fatal fault currents are detected.
Ground fault detection
Continuous ground fault detection is your best life insurance.
Safe charging thanks to automatic shutdown in case of overheating.
You can rule out theft thanks to the one-piece design and lockable adapters.
Effective kink protection prevents gradual cable breaks.
Fully automatic adjustment of charging-power current intensity
The J+ BOOSTER 2 automatically recognizes the connected adapter and regulates the charging power.
The J+ BOOSTER 2 is not only splashproof: it’s completely waterproof. (IP67)
Lockable wall bracket
To take it with you when traveling, simply use the handle to remove the J+ BOOSTER 2 from its holder bracket.
This combination lock lets you quickly and easily secure your J+ CONNECTOR adapters against theft.
Residual current device
Total cable length
Operating elevation limit
Impact and drop-proof
Length: 11” (280 mm), diameter: 2.76” (70 mm)
2.2 lb (1.0 kg) excluding cables, 7 lb (3.2 kg) with cables and adapters
720 W - 9.6 kW AC
6 A to 40 A
6 (protects against damaging quantities of dust and immersion in water for short periods)
Type 1 (SAE J1772)
8 self-detecting domestic adapters are available
NEMA 5-15; 5-20; 6-15; 6-20; 6-50; 14-30; 14-50; TT-30
approx. 25 feet / 7.6 m
Storage: -22 °F / -30°C to +140 °F / +60°C
Operation: -22 °F / -30°C to 122 °F / +50°C
Up to 10,000 ft (3,000 m) above sea level
Able to withstand a wheel load of 6,600 lb (3,000 kg) should you drive over it by mistake (the rubber casing may burst, and the housing and plug may be scratched or bent, but live components will not be exposed).
Drop-proof from heights up to 3 ft (100 cm)
Metallic anthracite, black rubber caps and cables
Anodised aluminium with rubber caps
UL2594, UL2231-1, UL2231-2, IEC 62196, IEC 61851-1, RoHS